Universal Remote KP-900i Specifications download pdf (Page 6)

Page 3

KP-900 OWNERS MANUAL

Securing the Wall Bracket

The KP-900 includes a wall bracket, four screws and four plastic caps to

conceal the screwheads. Consult with a professional installer before

attempting to secure the bracket to your wall. The included screws may

not be appropriate for your walls.

Before making a hole in your wall, gather the family and evaluate the best

height. Like a thermostat, the KP-900 should be at comfortable eye level

for most of the family, typically between 54” to 62” from the floor to the

top of the bracket (60” is typical).

Use a bubble level and a pencil to draw a line on the wall, then hold the

bracket in place. Screw in the four screws and cover the screw heads with

the included self adhesive caps.

Magnets in the bracket and the keypad keep the KP-900 securely in place,

yet make it easy to remove when you need a hand-held remote control.

Installing Batteries

There are two battery compartments on the rear of the KP-900. Each com-

partment holds two AAA batteries for a total of four AAA batteries.

Open each battery cover by pressing the release and pulling back the

cover on the back of the control. Remove the cover.

Observe the + and - polarity indicators on the batteries.

Place a battery into the compartment with the positive (+) terminal facing

the bottom of the KP-900. Slide the battery up into the top position and

insert the second battery into place.

Now, replace the battery cover by inserting the hinged end in first, then

snapping the cover back into place.

Repeat the process with the second battery compartment.

1 2 3 4 5 6 7 8 9 10 11 ... 19 20

No comments

Universal Remote KP-900i Specifications Page 6